Re•serve: [ri-zurv], verb (used with object): to set apart for a particular use, purpose, to withhold.
So you're ready for some mega power for your subs, but don't have the space for one of those massive surfboard amplifiers. You want to use a top tier brand name, but do not want to completely drain your savings. That brings us to Incriminator Audio mono block amplifiers. Everyone is well aware of the very long running success of the IA 20.1 mono, but you need even more power, and need to take it up to the RESERVE level.
Enter the all-new Incriminator Audio 30.1 Reserve. Why Reserve you say? Well Reserve is not only in regards to the excessive power it has in Reserve with its 4000 watts rms at 1 ohm mono, or that the IA 30.1 is Reserved for only the most special of subwoofer installs, but also you do not have to Reserve a huge amount of space for that huge amount of power.
What makes this IA 30.1 Reserve as one to be labeled Reserve? Let's begin with the patent pending SplitForce Technology that was introduced in latest IA 40.1, that cuts the amplifier length in half by placing the power supply section on one board, and the audio component section on a second board in a vertically stacked configuration using linking cables internally. This not only adds in conserving space and amount of heat sink material, but it also aids in cooling. Speaking of cooling, the IA 30.1 Reserve has 3, yes 3 cooling fans to keep the air flowing and the heat under control.
If you are worried about needing to strap or link a second IA 30.1 Reserve with this new style of layout, don't worry, the IA 30.1 Reserve is only 2” higher than the IA 20.1, so you have more end plate space for more features like strapping that would unleash a whopping 8000 watts at 2 ohm mono. Like the other big time IA mono block amplifiers, the IA 30.1 Reserve has a dual MOS-FET PWM power supply, and is stable up to 15.5 volt systems, along with DUAL power and ground inputs, and 4 AWG speaker wire connections.
A killer feature that really sets the IA 30.1 Reserve apart, is the input voltage display right on the side of the amplifier. It adds yet another level of protection to the already stout multi-layer protection circuitry, as well as the proprietary IA heat sink, high tolerance internal electrical components, and heavy duty double sided epoxy PCB.
Make the right choice the first time, and don't use a lesser quality amplifier that will struggle to deliver power and put up with all your demands, make sure you have power in Reserve with the IA 30.1 Reserve.
Product Manual: Click Here (Opens in new Window)
|Rated Power ( 14.4V at 1% THD )||IA30.1|
|RMS Power - 2 Ohm Linked :||8000W|
|RMS Power - 1 Ohm Mono :||4000W|
|RMS Power - 2 Ohm Mono :||2000W|
|RMS Power - 4 Ohm Mono :||1000W|
|Low Pass Filter ( 24dB/Oct. ) :||35Hz - 250Hz|
|Subsonic Filter ( 24dB/Oct. ) :||10Hz - 50Hz|
|Frequency Response ( +/- 1dB ) :||15Hz - 270Hz|
|Bass Boost ( 45Hz ) :||0 - 9dB|
|Input Sensitivity ( Volt +/- 5% ) :||6.0V - 0.2V|
|Signal / Noise Ratio :||95dB|
|Dampening Factor ( 1 Ohm ) :||350 +|
|Operation Mode :||Master/Slave/Mirror|
|Power Efficiency ( 4 Ohm ) :||85%|
|Fuse Rating ( 14.4V ) :||400A|
|Fuse Rating ( 14.4V Linked ) :||800A|
|Power Input Connection :||1/0 Gauge|
|Operation Voltage :||8.5V - 16.0V|
|Speaker Output Connection :||4 Gauge|
|Dimensions ( Inches ) :||10.63 W x 5.11 H x 11.81 L|
|Dimensions ( Millimeters ) :||270 W x 130 H x 300 L|
USPTO #: US10076062B2
SplitForce divides the power supply section and the audio section into two halves and places them on top of each other in a vertical configuration, and uses link cables to attach the two sides together creating a working unit that can function like existing amplifiers, while both sides have their own PCB. The end result is an amplifier that is 50% smaller in length, while still maintaining the ability to strap or link amplifiers. The additional two inches in height allows space to add many extra features such as an onboard voltage display, remote indicator (REM-I) plug which allows you to monitor the status of your amplifier from another location such as the dash or podium of your vehicle, three extra cooling fans, segmented power and ground connections. This unit has all the features, function, and power you need on the streets or in the lanes.
Show your love for Incriminator Audio
sporting your own IA gear. Hats, shirts,
Vinyl Stickers, Bass Mekanik CD's, Ear Buds,
Beanies & More!
Looking to buy some Incriminator Audio products?
Find your nearest IA dealer with our dealer locator.
No dealer near you?! No Problem.
Browse our Authorized online dealers.
Incriminator Audio, LLC
7751 Hwy 72
Killen, AL 35645
Incriminator Audio Products are covered by warranty for 1 year from date of purchase on parts and labor. As long as the product(s) is/are in accordance with the following terms and conditions.